KnowHow Webinars

Terry Chapin

Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

Scheduled Webinars by Expert

December 2024

Rubber Parts Tolerance
Date: 12 December 2024 (Thursday)
Time: 3.00 pm CET , ~60 Min
Speaker: Terry Chapin
Language: English
Registration Fee: Member: 150 US$
Non-Member: 250 US$
Group (5 Pax): 600 US$
To Register: Details & Register
Description: This KnowHow Webinar considers the factors that affect elastomer part tolerances and dimensional variations. Attendees will learn why standard tolerances used for plastic and metal parts are not applicable for molded rubber parts. Recommendations are made for how to measure rubber parts as well as recommended tolerances for rubber parts
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

January 2025

Rubber Parts Tolerance
Date: 12 January 2025 (Sunday)
Time: 3.00 pm CET , ~60 Min
Speaker: Terry Chapin
Language: English
Registration Fee: Member: 150 US$
Non-Member: 250 US$
Group (5 Pax): 600 US$
To Register: Details & Register
Description: This KnowHow Webinar considers the factors that affect elastomer part tolerances and dimensional variations. Attendees will learn why standard tolerances used for plastic and metal parts are not applicable for molded rubber parts. Recommendations are made for how to measure rubber parts as well as recommended tolerances for rubber parts
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

February 2025

Rubber Parts Tolerance
Date: 12 February 2025 (Wednesday)
Time: 3.00 pm CET , ~60 Min
Speaker: Terry Chapin
Language: English
Registration Fee: Member: 150 US$
Non-Member: 250 US$
Group (5 Pax): 600 US$
To Register: Details & Register
Description: This KnowHow Webinar considers the factors that affect elastomer part tolerances and dimensional variations. Attendees will learn why standard tolerances used for plastic and metal parts are not applicable for molded rubber parts. Recommendations are made for how to measure rubber parts as well as recommended tolerances for rubber parts
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

March 2025

Rubber Parts Tolerance
Date: 12 March 2025 (Wednesday)
Time: 3.00 pm CET , ~60 Min
Speaker: Terry Chapin
Language: English
Registration Fee: Member: 150 US$
Non-Member: 250 US$
Group (5 Pax): 600 US$
To Register: Details & Register
Description: This KnowHow Webinar considers the factors that affect elastomer part tolerances and dimensional variations. Attendees will learn why standard tolerances used for plastic and metal parts are not applicable for molded rubber parts. Recommendations are made for how to measure rubber parts as well as recommended tolerances for rubber parts
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

On-demard Webinars by Expert

Rubber Molding using Vacuum: Theory & Practice
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~ 70 Min.
To Register: Details & Register
Description: The application and use of vacuum in rubber molding processes is well known, however, the principles of vacuum molding in rubber molding processes is not as well known. In this seminar many specific aspects and parameters related to the principles and function of vacuum are presented. People considering the use of vacuum will gain a working knowledge of how to apply a vacuum to a rubber mold. People already responsible for vacuum processing in the rubber plant will benefit from insight gained from this webinar.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Rubber Product Molding and Process Overview for the Non-Technologist
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~90 Min
To Register: Details & Register
Description: Participants will be presented with a basic review of the processing of rubber as well as various types of equipment used in the manufacture of rubber products. An objective of this webinar is to give the novice in the rubber industry and/or a person peripherally related to the rubber industry a good general understanding of how rubber products are manufactured, without overwhelming them with lots of technical terminology.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Selection of the Molding Process for Rubber Parts
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~80 Min
To Register: Details & Register
Description: Participants will gain a better understanding of the main factors which influence the selection of a molding process for a rubber product.  Many rubber products can be molded using any rubber molding process. Therefore, the ability to match a rubber product to the most cost effective molding process may be critical to a company’s ability to be competitive in an ever competitive market place.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Cost Estimating for Molded Rubber Parts
Speaker: Terry Chapin
Registration Fee: Member: 975 US$
Non-Member: 1,275 US$
Group (5 Pax): 3,000 US$
Language: English
Time Length: ~150 Min
To Register: Details & Register
Description: This training program is aimed for rubber molded parts manufacturers . The program focuses on a thorough review of factors which have the most impact on the costs for rubber molded parts. Factors such as raw material prices, labor rates, press rates and how to determine some of these variables will be discussed. Attendees responsible for buying, selling, or manufacturing rubber products will benefit from this webinar. Participants will also a copy of "Chapin Molded Rubber Parts Cost Calculator" program, which is developed by Terry Chapin. This calculator is very useful tool for estimating rubber parts cost.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Rubber Product Material Selection Overview
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~120 Min
To Register: Details & Register
Description: This KnowHow Webinar will be presented with a basic overview of rubber polymers. Typical properties for each of the polymers will be discussed followed by a methodology for selecting the best material for an application. Discussion includes insight into how rubber flows, how to analyze rubber flow, and how rubber flow impacts the rubber molding process.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Mold Releases Plating and Coatings for Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~75 Min
To Register: Details & Register
Description: This KnowHow Webinar will be presented with various mold release types, application technique, application frequency and factors to consider when selecting a mold release. The webinar will also discuss various mold platings and coatings and as well as some real world results for mold releases, plating and coating. The discussion also includes a recommended steps to follow to get appropriate part release.
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Rubber Parts Tolerance
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~60 Min
To Register: Details & Register
Description: This KnowHow Webinar considers the factors that affect elastomer part tolerances and dimensional variations. Attendees will learn why standard tolerances used for plastic and metal parts are not applicable for molded rubber parts. Recommendations are made for how to measure rubber parts as well as recommended tolerances for rubber parts
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Rubber Mold Debug
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~90 Min
To Register: Details & Register
Description: Participants will be offered suggestions for possible solutions to correct mold problems including rubber adhesion and bonding rubber to plastic. Gating and venting options for rubber molding will also be discussed
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Deflashing Techniques in Rubber Molding Process
Speaker: Terry Chapin
Registration Fee: Member: 225 US$
Non-Member: 375 US$
Group (5 Pax): 900 US$
Language: English
Time Length: ~45 Min
To Register: Details & Register
Description: This KnowHow Webinar reviews the various methods that are used to deflash, remove excess flash, from molded rubber parts. Hand deflashing methods as well as automated methods including both cryogenic and non-cryogenic methods will be discussed
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 975 US$
Non-Member: 1,275 US$
Group (5 Pax): 3,500 US$
Language: English
Time Length: ~11 Hrs
To Register: Details & Register
Description: Module 1: Introduction to Compression Molding
Module 2: Rubber Processing & Part Deflashing
Module 3: Compression Mold Design - Part 1
Module 4: Compression Mold Design - Part 2
Module 5: Pulse Filling & Compression Preforms
Module 6: Platens, Mold Mounting and Mold Insulation
Module 7: Air Removal for Compression Molding
Module 8: Troubleshooting of Compression Molding
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Introduction to Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~48 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Rubber Processing & Part Deflashing in Compression Molding
Speaker: Terry Chapin
Registration Fee: Member: 2 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~65 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Compression Mold Design - Part 1
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~67 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Compression Mold Design - Part 2
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~75 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Pulse Filling & Compression Preforms in Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~40 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Platens, Mold Mounting and Mold Insulation in Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~55 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Air Removal for Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~70 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.
Troubleshooting of Compression Rubber Molding
Speaker: Terry Chapin
Registration Fee: Member: 150 US$
Non-Member: 225 US$
Group (5 Pax): 600 US$
Language: English
Time Length: ~65 Min
To Register: Details & Register
Description:
Speaker: Mr. Terry Chapin is currently a Rubber Technologist at Elastomeister doing rubber consulting, training and teaching, he has worked as a Senior Materials Engineer, working with elastomer and foam materials, Senior Rubber Technical and Cost Leader and a Tool Engineer for rubber and plastic molds. He holds two U.S. patents and has been involved in the rubber industry for 40 years, working with rubber companies globally. Terry has been an active technical speaker for university level continuing education instruction, rubber conferences and technical in-plant venues for 30 years.

Contact for Assistance :

THAILAND
Tel: +66-89-489 0525
Email: peram.technobiz@gmail.com
WhatsApp/WeChat: +66-89-489 0525 (messages only)

USA
Tel: +1-856-981 4381

Contact Address
KnowHow Webinars
TechnoBiz Communications Co., Ltd
2521/27, Lardprao Road, Khlongchaokhunsingha
Wangthonglang, Bangkok 10310 THAILAND
Tel: +66-2-933 0077 Fax: +66-2-955 9971
WhatsApp: +66-89-489 0525


KnowHow Webinars
THAILAND : +66-89-489 0525     USA: +1-856-981 4381
WhatsApp: +66-89-489 0525 (Messages only)     Email: peram.technobiz@gmail.com     Web: www.knowhow-webinars.com